USEFUL GENERAL AND MONEY SAVING TIPS
This is an area where I am sure there is a wealth of
untapped knowledge, tips and ideas. It is amazing how many things learnt during
harder times stand people in good stead over the years.
My mum used to lengthen our dresses each year by adding
a 3"-4" strip of a contrasting fabric into the skirt. Unfortunately,
however, the number of additional strips indicated how old the dress was (a bit like a
Anyone else out there who can share such gems with us
contact us on firstname.lastname@example.org, we
would love to hear from you.
To keep the "fizz" in an
unfinished canned drink put the end of a teaspoon in the can and the next day it will
still be fizzy.
Thankyou Claire Anderson for
Due to the heat from an electric
light bulb, over a period of time, it can become extremely difficult to unscrew the
plastic components when it becomes necessary to change the shade etc. Running an
ordinary pencil point over the threads before assembly will make future
dismantling effortless. Graphite from the pencil point is a good heat resisting
Sent in by K. Hall, thanks
- To stop sofa cushions from slipping, cut a piece of
material roughly two inches smaller than the offending cushion. Thin smooth material
works best. Lightly spray first one side and then the other of this material with 3M
repositionable spray adhesive (can be obtained from office suppliers or art/graphics
material suppliers). Follow the instructions carefully and be sure to protect from
overspray. Carry out this procedure in a well ventilated area (outside if possible).
Allow about twenty minutes drying time then carefully place the tacky
the sofa base and neatly place the cushion on top.
It will only move now when you want it to. The cushion can be moved
three or four times before the adhesive needs renewing.
We have Mae Loat from Australia to thank for
this useful tip, however, she does include some timely warning:-
CAUTION: I have never noticed that any of the
adhesive was transferred to the cushions but you may need to verify this yourself with a
trial on the old armchair first.
Do NOT spray the adhesive onto the cushions or base
of sofa. If you do this either with or without the tacky material you may have made
a very strong joint when you place the cushions back. If you do end up with the
wrong bits stuck together it may be worth knowing that most spray adhesives are
susceptible to silicone oil and rapidly come un-glued. Most spray treatments
designed to waterproof clothes etc. are based on silicone oil and may help dramatically.
Prevention is better than cure.
I would like to add my own warning to this - we have
very strict fire regulations regarding furniture foam and upholstery in the U.K. and I am
not sure whether this treatment would add to the fire risk. Although they must still
use adhesives when manufacturing furniture. Best to bear this in mind though.
- To prevent those impulse buys, freeze your credit
cards in ice, this way you have to wait for them to thaw allowing you time to reconsider
your decision to buy.
- To remove all traces of cigarette smoke, leave a saucer of vinegar in
the room overnight.
- A clean, dry, green kitchen scourer is ideal for removing pets hairs
from furniture, carpets and clothes.
- To clean the inside a flower vase, particularly one of a difficult
shape, fill with hot soapy water, add a teaspoon of dry rice and shake vigorously.
- To clean glass decanters, put broken egg shells and
water into decanter, shake vigorously. Leave overnight, rinse out well - should be
- To remove candle wax from material. Heat bowl
of spoon over candle, wet some newspaper and squeeze out excess water. Place damp paper
over candle wax to be removed. Rub hot spoon gently over paper where the wax is,
remove paper and the wax should come away cleanly.
- Remove heat marks from dark furniture by gently rubbing with a
walnut and then a little polish.
- A small amount of salt added to washing up water will make glass
really clean and shiny.
- Stubborn stains on polished surfaces can sometimes be removed with a
- Turning the thermostat on your central heating down by one or two
degrees can reduce fuel bills quite substantially.
- Ensuring lights are turned off when leaving a room will also save
money - every little helps
- If you have a little beverage left over, don't throw
it away. Pour it into ice cube trays and freeze it. When you prepare the same
beverage use these ice cubes instead of the "water" type. When the ice
melts your drink will not lose its flavour and become too watery.
Thank you Siren - USA
- To cool a bottle of drink quickly get an ice bucket (or similar
container) put in 1/3 water, 1/3 ice cubes and then the bottle. If you put more ice
cubes the bottle rests on the top, if your put more water the ice cubes float and are not
- White wine chills better if cork is taken out first.
- To keep champagne fizzy once opened place a teaspoon
in neck - will keep for 2/3 hours.
- To prevent drinks from overflowing when pouring into
glass, use warm glass, the put in ice to cool down.
- If ice cubes stick together in a container, pour some
soda water or sparkling water over ice and this will release cubes.
- To perk up instant coffee - after placing instant
coffee in cup add some crushed cardamom seeds and stir. Remove seeds.
- For hot towels at home - dampen some flannels, roll
up and spray each lightly with your favourite toilet water. Place on
plate and cover with clingfilm. Place in microwave for a few seconds - hey presto!
Hot towels in seconds.
If you have an insert clock movement
inside a small ornamental item (e.g. a teapot) and sometimes the
movement falls out or it is too loose, it is quite easy to fix this.
This is quite common, and either the
thin o-ring has come off the outside of the insert movement case, or
the ornamental part has been made a bit too large. Either way, this
can be overcome simply by using a few small beads of BLU-TACK around
the outside of the movement case (avoiding the winder), then pushing
the movement back into its ornamental housing.
Any excess can be scraped off using a
cocktail stick or finger nail.
This is far better than glue, as it
will NOT get into the working parts of the movement, and can easily
be removed if needed.
This is an extract from
most popular online DIY community.
Copyright © 2000-2017 Hints and Things
All Rights Reserved.
No portion of this site may be reproduced or redistributed without prior
written permission from Hints and Things. All trademarks & copyrights
throughout Hints and Things remain the property of their respective
Hints and Things cannot be
held responsible for any information given on this site nor do they
necessarily agree with, or endorse, the views given by third parties.