logo.jpg (10651 bytes)

WORKSHOP

HOME - GarageWorkshopOfficeLibraryBathroomLivingNurserySpare
UtilityKitchenGamesMusic - GardenKennel - SEARCH SITE

 

 Hints and Things does not use any 1st Party cookies - more information


How to Save on Heating Costs in your Home

Inefficiencies in your plumbing system or heaters can result in unnecessary costs. Keep bills down this winter and improve your ‘Green Credentials' with the following tips:

Insulate your hot water cylinder

A 30 gallon cylinder maintained at a temperature of 60 ˚ C (140 ˚ F) loses enough heat every week to heat about 20 baths! Insulation by fitting a 3inch thick lagging jacket on a hot water cylinder cuts down weekly heat loss by about 70%.

Many modern cylinders are foam lagged by the manufacturer. Never strip off part of a cylinder lagging jacket to warm an airing cupboard – it is cheaper to install a low powered heater in the cupboard.

Install a shower

A bath uses about 6 times as much water as a shower. Keep costs down by showering for daily bathing and use the bath as a treat for a relaxed soak.

Heat water only as needed

Although a thermostat supplies economical heating by controlling temperature, even a wall-lagged cylinder will lose heat. This can add up to considerable cost if the heater is left on all the time.

You can gain significant savings by rather switching your immersion heater or boiler on about an hour before hot water is needed. The most convenient way to do this is to have the heater fitted with a time switch that is set to turn on at times of peak household use.

It is also a good idea to take advantage of night rates for electricity – details off peak meters and tariffs are available from your local electricity board.

Prevent scale formation in water pipes and appliances

About 65% of British homes have hard or moderately hard water. This is caused by a high concentration of dissolved calcium and magnesium salts, leaving a crust when it dries that solidifies into scale at high temperatures.

When scale forms inside a domestic boiler or hot water cylinder, it insulates the water from the heat and wastes fuel. The pipes also gradually become blocked.

Scale can be prevented by:

  • Controlling water temperature – scale starts to form above 60 ˚ C (140 ˚ F)

  •  

  • Suspend scale inhibiting chemicals in crystal form in the cold water cistern (it will need to be changed ever 6 months).
     
  • Having a water softener installed – no need to apply this to outside use.

  •  

  • Having a magnetic water conditioner installed – the water passes through a magnetic field which changes the structure of the scale forming salts, making them finer so that they pass through the pipe rather than forming a cluster of scale. This conditioner has a filter which will need cleaning about twice a year.

 

Making your home eco-friendly is not only great for the environment but also means savings on your energy bills so here is some more information and advice on how to make your home green and, thereby cut costs on your energy consumption.

More Energy Saving Tips – an essential Infographic guide to run an eco-friendly home

Green ways of heating your home. and other ways to save energy and heating costs.


 

 

 

Copyright 2000-2014 Hints and Things


All Rights Reserved.

No portion of this site may be reproduced or redistributed without prior written permission from Hints and Things. All trademarks & copyrights throughout Hints and Things remain the property of their respective owners.

Hints and Things cannot be held responsible for any information given on this site nor do they necessarily agree with, or endorse, the views given by third parties.

Workshop Index - Search - Contents - Contact Us - Home - Disclaimer - Legal - Privacy and Cookie Information
GarageWorkshopOfficeLibraryBathroomLivingNurserySpare
UtilityKitchenGamesMusic - GardenKennel